Magnetic Spring Steel Double Textured PEI Build Platform 310x310x0.4mm

Description

Magnetic Spring Steel Double Textured PEI Build Platform 310x310x0.4mm

Digunakan sebagai build platform 3D Printer, PEI surface baik untuk berbagai jenis filament dan menempel dengan baik, jika setelah selesai print, untuk mencopotnya tinggal tekuk plat sedikit.

Ukuran : 310 x 310mm
Warna : Natural Amber PEI
Tipe PEI : Smooth
Ketebalan : 0.4mm

Recommend Print Temperature :
PLA : ~60C
HTPLA : ~60C
PETG : ~70-80C
PCTG : ~70-80C
ABS : ~100C

WARNING :
PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI

OBJECT REMOVAL : Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface.

Harga tertera untuk :
1x Magnetic Spring Steel Double Textured PEI Build Platform 310x310x0.4mm